A simple current-mode Schmitt trigger employing only single MO-CTTA

Abstract- A new current-mode Schmitt trigger based on MO-CTTA (Multiple output current through transconductance amplifier) is presented in this article. The circuit description is very simple, its construction consists of only single MO-CTTA. The hysteresis and amplitude of the output current can be tuned independently/electronically. With mentioned features, it is very suitable to realize in a monolithic chip. The PSPICE simulation and experimental results are depicted, and agree well with the theoretical anticipation. The maximum power consumption is approximately 249mW at ±5V supply voltages. I

A single MO-CFTA based electronically/temperature insensitive current-mode half-wave and full-wave rectifiers

The article presents a current-mode full-wave rectifier employing multiple output current follower transconductance amplifier (MO-CFTA). The both circuits description is very simple, it merely comprises only single MO-CFTA, without external passive element. In addition, the magnitude and direction of output currents can be controlled via electronically method. Furthermore, the outputs are independent of the thermal voltage (VT). The performances of the proposed circuits are investigated through PSpice. They show that the proposed circuits can function as a current-mode precision half-wave and full-wave rectifiers where input current range from 0uA to 514uA and -518uA to 518uA, respectively. They can be achieved at ±2V power supplies. The maximum power consumption is 3,01mW

A voltage-mode first order allpass filter based on VDTA

This article presents a new voltage-mode first order allpass filter (APF) employing voltage differencing transconductance amplifier (VDTA). The advantages of the circuit are that: the circuit description is very compact, consists of merely a VDTA and a capacitor: the phase shift can be electronically adjusted by current bias: it provides the lower THD of the output signal. Without any component matching conditions, the proposed circuit is very appropriate to further develop into an integrated circuit. Moreover, the proposed APF can provide the output current with high output impedance without modification of the circuit topology. The PSpice simulation results are depicted. The given results agree well with the theoretical anticipation. The maximum power consumption is 400µW at ±1.25V power supplies

Single Commercially Available IC-Based Electronically Controllable Voltage-Mode First-Order Multifunction Filter with Complete Standard Functions and Low Output Impedance

This paper presents the design of a voltage-mode three-input single-output multifunction first-order filter employing commercially available LT1228 IC for easy verification of the proposed circuit by laboratory measurements. The proposed filter is very simple, consisting of a single LT1228 as an active device with two resistors and one capacitor. The output voltage node is low impedance, resulting in an easy cascade-ability with other voltage-mode configurations. The proposed filter provides four filter responses: low-pass filter (LP), high-pass filter (HP), inverting all-pass filter (AP-), and non-inverting all-pass filter (AP+) in the same circuit configuration. The selection of output filter responses can be conducted without additional inverting or double gains, which is easy to be controlled by the digital method. The control of pole frequency and phase response can be conducted electronically through the bias current (I-B). The matching condition during tuning the phase response with constant voltage gain is not required. Moreover, the pass-band voltage gain of the LP and HP functions can be controlled by adjusting the value of resistors without affecting the pole frequency and phase response. Additionally, the phase responses of the AP filters can be selected as both lagging or leading phase responses. The parasitic effects on the filtering performances were also analyzed and studied. The performances of the proposed filter were simulated and experimented with a & PLUSMN;5 V voltage supply. For the AP+ experimental result, the leading phase response for 1 kHz to 1 MHz frequency changed from 180 to 0 degrees. For the AP- experimental result, the lagging phase response for 1 kHz to 1 MHz frequency changed from 0 to -180 degrees. The design of the quadrature oscillator based on the proposed first-order filter is also included as an application example

Duty-Cycle Electronically Tunable Triangular/Square Wave Generator Using LT1228 Commercially Available ICs for Capacitive Sensor Interfacing

This paper proposes a duty-cycle electronically tunable triangular/square wave generator using LT1228 commercially available ICs for capacitive sensor interfacing. The generator comprises two LT1228s, a grounded resistor, and a grounded capacitor. The circuit provides two output signals which are triangular and square waves. Both signals are regulated by adjusting the current bias. Likewise, the amplitude of the triangular signal can be tuned electronically without affecting the frequency. In addition, the square wave can independently control the linear duty cycle via tuning the voltage. Experiment results confirm the performance of the proposed circuit that the amplitude of the triangular wave, frequency, and duty cycle are linearly controllable via current or voltage, which do not affect each other. The duty cycle, the amplitude of the triangular wave, and frequency have maximum errors of ±1.60%, ±3.33%, and ±2.55%, respectively

Duty-Cycle Electronically Tunable Triangular/Square Wave Generator Using LT1228 Commercially Available ICs for Capacitive Sensor Interfacing

This paper proposes a duty-cycle electronically tunable triangular/square wave generator using LT1228 commercially available ICs for capacitive sensor interfacing. The generator comprises two LT1228s, a grounded resistor, and a grounded capacitor. The circuit provides two output signals which are triangular and square waves. Both signals are regulated by adjusting the current bias. Likewise, the amplitude of the triangular signal can be tuned electronically without affecting the frequency. In addition, the square wave can independently control the linear duty cycle via tuning the voltage. Experiment results confirm the performance of the proposed circuit that the amplitude of the triangular wave, frequency, and duty cycle are linearly controllable via current or voltage, which do not affect each other. The duty cycle, the amplitude of the triangular wave, and frequency have maximum errors of ±1.60%, ±3.33%, and ±2.55%, respectively